The method of detection of incomplete-phase operation of electrical equipment.

  • В К Зайцевский

Abstract

The method is based on the phenomenon of a six-pulsation rectified voltage with a three-phase network and a four-pulse with a two-phase into a two-half-wave when a single-phase mode occurs. The two-transistor device that implements this method is simple; . The method of calculation and the scheme of a device designed to control a three-phase network with a voltage of 200 V. The power consumption does not exceed 4.5 W. The operating temperature range is from -10 ° to + 70 ° C. The device's performance is confirmed by the normal operation of more than 500 of its samples.

Published
2019-02-07
How to Cite
Зайцевский, В. (2019). The method of detection of incomplete-phase operation of electrical equipment. Electrotechnic and Computer Systems, (20(20), 67-70. Retrieved from https://eltecs.op.edu.ua/index.php/journal/article/view/450
Section
Automated electromechanical systems